Skip to content
ToolPlankDEV
Image & SVG Tools
100% In-Browser Execution

Updated:

EXIF Data Remover: Strip GPS and Metadata from Photos

Use this EXIF data remover to see what a JPEG reveals, such as camera, date and GPS location, and strip it. Pixels are not re-encoded, so quality stays identical. Files never leave your browser.

Processing in browser...

Loading the tool. It runs entirely in your browser, so your data is never uploaded.

More free tools you may need next.

Quick Guide

How to use EXIF Remover

Simple step-by-step instructions to get the exact output you need.

  1. 01

    Add your photos

    Drop one or more JPEG photos on the box, or press Select photos. The Sample button loads a small picture with made-up camera and GPS data, so you can see the tool work before you use your own files.

  2. 02

    Read what each photo reveals

    Every photo gets a card. It shows the camera, the date taken, the software used and, in red, the GPS position if there is one. The card also lists what was removed and how much smaller the file got.

  3. 03

    Choose what to keep

    Keep orientation leaves one small tag that says which way is up, so photos taken in portrait do not turn sideways. Keep colour profile leaves the ICC profile that keeps colours accurate. Switch both off for the barest possible file.

  4. 04

    Download the clean copy

    Press Download clean photo on a card, or Download all (.zip) when you have two or more. Your original file is not touched. The clean copy has the same name with -clean added.

What an EXIF Data Remover Does

A photo from a phone or camera carries more than pixels. The file also holds a block of notes called EXIF data: the camera make and model, the time the shot was taken, the settings, and often the GPS position where you stood. This exif data remover shows those notes and then writes a copy of the file without them.

Most people notice the problem after the fact. A photo of an item for sale taken at home can carry the address of your home. A picture sent to a stranger can show the exact minute it was taken. Stripping the metadata before you share is a simple habit that closes that gap.

How It Strips Metadata Without Re-Compressing

A JPEG file is a list of labelled segments followed by the compressed picture data. Metadata lives in its own segments. Many online cleaners redraw the picture and save it again, which discards a little quality each time. This tool never touches the picture data. It copies the file segment by segment and leaves out the ones that hold personal details.

  1. The file is read in your browser and its segments are listed.
  2. EXIF, XMP, IPTC, comment, thumbnail and other application segments are dropped.
  3. Anything stored after the end-of-image marker is dropped too. Some cameras and apps append extra data there.
  4. The tables and picture data that make the image are copied byte for byte, so the pixels stay exactly the same.

Because nothing is decoded and re-encoded, there is no quality loss and the file only gets smaller. A photo with a large embedded preview can shrink noticeably. A photo with little metadata changes very little.

What Your Photos Can Reveal

When you add a file, the tool reads the common fields and shows them. Here is a real run on the built-in sample: the card reported the camera as Sample Camera Co SC-100, the software as Sample Editor 1.0, the date taken as 2026:03:14 09:26:53 and the GPS position as 51.50070° N, 0.12460° W. The 302-byte test file came out at 58 bytes, and none of those details were left in it.

  • Location: GPS latitude and longitude, when location was switched on for the camera.
  • Device: the make, model and sometimes the lens.
  • Time: when the photo was taken, down to the second.
  • Software: the editing app that last saved the file.
  • Owner details: artist and copyright fields, and free-text comments, when someone typed them in.
  • A small preview picture of the original, which can still show an area you later cropped out.

The tool shows the fields it can read. A file can hold other notes in formats it does not decode, such as maker-specific data. Those are removed as well, but they are not displayed.

Keep Orientation and Keep Colour Profile

Phones often save a portrait photo as a sideways picture plus a tag that says to turn it 90 degrees. If that tag is removed, the photo shows up sideways. Keep orientation, which is on by default, rewrites a tiny new tag holding only the rotation. It contains no camera, date or location details.

The colour profile is a separate segment that tells programs how to read the colours. It holds no personal details, so it is kept by default. Switching it off makes the file slightly smaller, but colours may look a little different in some programs. Switch both options off if you want the plain minimum.

Remove Metadata from Many Photos at Once

Select or drop several JPEG files together. Each one gets its own card, so you can check what was in every photo and remove one from the list if you added it by mistake. With two or more clean files, Download all (.zip) packs the clean copies into a single archive. The limit is 40 photos at a time, up to 40 MB each.

If you need the pictures in another format afterwards, PNG to SVG traces flat artwork into a vector and SVG to PNG turns a vector into a pixel image. Those tools change the image itself. This one keeps your photo exactly as it was and only removes the notes stored with it.

What Removing EXIF Does Not Hide

  • Anything you can see in the picture: street signs, house numbers, faces, number plates and landmarks.
  • The file name. A name such as IMG_2031.jpg is kept, with -clean added. Rename the file if the name itself says too much.
  • What a website or app does with your photo after you share it. Check its own settings if the location matters to you.

Removing metadata is one step, not a guarantee of anonymity. Look at the picture itself before you post it.

Reading Your Cleaned Files and Other Tips

To confirm a clean copy, drop it back into the tool. A file with nothing left says so. If Keep orientation is on and the original was rotated, you will see only an orientation entry and no camera, date or location.

  • Work on copies if the original needs its metadata, for example for a photo library sorted by date.
  • A photo that was already saved by another app may have no metadata left, and the tool then reports that nothing was found.
  • If a file is refused as damaged, it is probably cut off or not a real JPEG. Try the original from the camera.
  • Each card shows the size before and after, so you can see how much the metadata took up.

Everything happens in your browser tab. Your photos are not sent to a server, and the Privacy Policy describes what the site does and does not store. Other tools on this site, such as Base64 Encode, also run in the browser.

Frequently Asked Questions

Technical Q&A for EXIF Remover

Common questions about edge cases, character encoding, and privacy guarantees.

No. The file is read and cleaned in your browser tab. Nothing is sent to ToolPlank or anyone else.

Add the JPEG to the tool, check the card to see what it contains, then press Download clean photo. The copy has the EXIF, GPS and other metadata removed.

No. The tool copies the picture data byte for byte and leaves out the metadata segments, so the pixels stay identical. The file only gets smaller.

Add the photo and download the clean copy. GPS data is part of the EXIF block, so removing EXIF removes the location. The card shows the position in red before you do.

JPEG only, meaning .jpg and .jpeg files. PNG, HEIC, WebP and RAW files are not supported and the tool tells you so.

The original was stored sideways with an orientation tag, and the tag was removed. Switch on Keep orientation, which keeps only the rotation and nothing else.

Yes. You can add up to 40 photos at a time, each up to 40 MB, and download the clean copies together as a ZIP.

No. Your original stays where it is. The tool makes a new copy with -clean added to the name.

Some do, but you cannot count on it for every site or app, and many leave the file as you sent it. Cleaning the photo yourself first means you do not have to rely on that.

It removes the metadata stored in the file. It cannot hide what is visible in the picture, such as faces or street signs, and it does not rename your file.